Installing a Brick Paver Walkway or Loose Bricks

The usage of Bricks or Pavers to develop a walkway or patio complements a home in a way that is unrivaled. In addition, setting up a Brick or Paver pathway does not necessarily need a pro.

The secret to setting up a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be installed. The area must be removed a minimum of a foot down, getting rid of all topsoil and clay soil. In addition, string lines must be strung on each side of the sidewalk. The string lines suggest the completed height of the pathway.
Once the location has actually been dug down, 3/4" gravel stone need to be laid in and tamped down firmly. Then 2" of sand, or stone dust ought to be topped the gravel. Again the sand/stone dust ought to be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline must equate to the thickness of the brick or paver.

Now that you have a steady base, put a 1" pipeline or journal board the length of the sidewalk on either side of the walkway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level surface area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick click here borders. Set up a run on both website sides of the prepared location. These strips will act as your walkway border and help to preserve the integrity and shape of the sidewalk.

You can then begin to lay the bricks/pavers once this is done. There are many patterns you can lay. I particularly like the Herring Bone pattern. The key to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again assist maintain the integrity of the sidewalk.

Inevitably bricks/pavers will need to be cut or divided when building the walkway. To really cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you want to break the brick. If your sidewalk has curves you will need to buy/rent a wetsaw.

After installing the bricks, develop the outdoors edges with extra sand, and after that shovel in the topsoil and load down securely.
Spread stone dust over the brand-new sidewalk and sweep into the fractures. This will finish the interlocking of the bricks and help to eliminate any weed growth.


In addition, setting up a Brick or Paver pathway does not always require a pro. The key to setting up a Brick website or Paver Walkway is to very first correctly prepare the area where the bricks/pavers are to be installed. Now that you have a steady base, place a 1" pipe or journal board the length of the pathway on either side of the pathway. These strips will act as your walkway border and help to maintain the stability and shape of the pathway. Inevitably bricks/pavers will need to be cut or split when developing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *